NEW EMERSON ROSEMOUNT ALPHALINE® NUCLEAR PRESSURE TRANSMITTER 1153DB5PAN0016

Description

ONE NEW EMERSON ROSEMOUNT NUCLEAR ALPHALINE® NUCLEAR PRESSURE TRANSMITTER
1153DB5PAN0016
.
Serial Number: 60-0508423
Differential Configuration
Static Pressure Rating 2000 psig (13.8 mPa)
Painted Aluminum housing qualified per
IEEE
Stds. 323-1974, 323-1975
Calibrated 0-125 to 0-750 psig in H₂O
Output standard 4-20mA, maximum 45vdc supply
Welded ⅜"
Swagelok
®
Compression Fitting Process Connectors
Welded Drain/Vent Valve
Alphaline® Nuclear Pressure Transmitter
BOOKMARK THIS EBAY PAGE, THEN OPEN ANOTHER PAGE OF THIS BROWSER, AND COPY AND PASTE THESE URL'S INTO THE BROWSER'S WEB ADDRESS BAR, TO VISIT THEM (AND THEN, RETURN HERE)
PRODUCT DATA SHEET      http://www2.emersonprocess.com/siteadmincenter/pm%20rosemount%20documents/00813-0100-4302.pdf
PRODUCT INFORMATION PAGE      http://www2.emersonprocess.com/en-us/brands/rosemount/nuclear/1153-series-b/pages/index.aspx
ROSEMOUNT TRANSMITTER 1153 SERIES B ALPHALINE NUCLEAR PRESSURE TRANSMITTER REFERENCE MANUAL      http://www2.emersonprocess.com/siteadmincenter/pm%20rosemount%20documents/00809-0100-4302.pdf
PRODUCT DATA SHEET 1153 SERIES D      http://www2.emersonprocess.com/siteadmincenter/pm%20rosemount%20documents/00813-0100-4388.pdf
The
Rosemount 1153 Series B Alphaline® Pressure Transmitters
are designed for precision pressure
measurements in nuclear applications requiring reliable performance and safety over a specified
qualified life. These transmitters were qualified per
IEEE
std. 323-1974 and
IEEE
std. 344-1975
to
radiation levels of 22 megarads TID gamma radiation, seismic levels of 4 g's, and for steam-pressure
performance. Stringent quality control during the manufacturing process includes traceability of
pressure-retaining parts, special nuclear cleaning, and hydrostatic testing.
TRANSMITTER DESCRIPTION
The
Rosemount 1153 Transmitters
are uniquely built for class
1E
nuclear service while retaining the
working concept and design parameters of the
Rosemount 1151 Series
that have become a standard
of reliable service. Units are available in Absolute (
A
), Gage (
G
), Differential (
D
), and High-Line Differential
(
H
) configurations, with a variety of pressure range options.
Direct electronic sensing with the completely sealed δ-Cell capacitance sensing element eliminates
mechanical force transfer and problems associated with shock and vibration. Installation and
commissioning are simplified by the compact design and 2-wire system compatibility. Wiring terminals and
electronics are in separate compartments, so the electronics remain sealed during installation.
The completely sealed δ-Cell capacitance sensing element is the key to the unequaled performance and
reliability. Its simple design concept is recognized as a landmark in transmitter engineering. As shown in
Figure 1, process pressure is transmitted through an isolating diaphragm and silicone oil fill fluid to a
sensing diaphragm in the center of the δ -Cell. A reference pressure is transmitted in like manner to the
other side of the sensing diaphragm.  Displacement of the sensing diaphragm, a maximum motion of 0.004 inches (0.1 mm), is proportional to the pressure differential across it. The position of the sensing diaphragm is detected by capacitor plates on both sides of the sensing diaphragm. Differential capacitance between the sensing diaphragm and the capacitor plates is converted electronically to a 2-wire, 4–20 mA DC signal.

SAME DAY SHIPPING, NEXT DAY DELIVERY AVAILABLE, IF PURCHASED BY  4 PM EASTERN DAYLIGHT SAVINGS TIME.